impregnation

High-performance impregnation and care for agricultural equipment

High-performance impregnation and care for agricultural equipment

For plant protection equipment and agricultural equipment. Protects against extreme soiling. Prevents water, grease and oil-based soiling as well as plant protection products from adhering. Creates a breathable and long-lasting beading effect. This makes subsequent cleaning much easier. Suitable for all hard surfaces. If necessary, avoid using on viewing panels due to streaking. The impregnation penetrates deeply and provides long-lasting protection without changing the appearance of the surface. Easy to use – best and long-lasting protection.

The effect of the impregnation The impregnation penetrates deeply and provides long-lasting protection without changing the appearance of the surface. Breathability is retained, moisture can continue to escape and moisture accumulation and unwanted discolouration are prevented.

- Long-lasting protection against extreme influences and stresses

- No penetration of watery, greasy and oily dirt

- Protection without changing the appearance of the surface

- Breathability is retained

- EASY CLEAN: makes subsequent cleaning easier

Preparation: Clean the surface to be treated. Allow to dry thoroughly. The processing temperature should be between 10 °C and 25 °C. Do not use at temperatures above 30 °C or in direct sunlight. Test for surface compatibility on an inconspicuous area before use.

Application: Apply the ready-to-use solution undiluted evenly and generously with an absorbent sealing brush. If necessary, remove excess with an absorbent cloth. Full respiratory protection is required when spraying – use only outdoors. A second coat is recommended for highly absorbent surfaces. Coverage up to 40 m² depending on the absorbency of the material.

Drying time: Dries very quickly and can be used after just 30 minutes. Full protection after approx. 24 hours.

Subsequent cleaning: Rinse off dirt with water and wipe lightly with a sponge or brush if necessary. Avoid high pressure to ensure the longest possible protection.

Storage: Store in a cool, dry place.